Sorry, your browser doesn't support Java(tm).

1. START

• Meeting with customer to arrange scheduling for rooms and areas to be painted.
• Large pieces of furniture are moved into the center of the room.
• Furniture is covered with tarp or plastic.
• Drop cloths are placed to cover floors.

2. SURFACE PREPARATION

• Walls are scuff-sanded as needed.
• Holes and cracks in walls are repaired.
• Any gaps in trim are caulked.
• Any stains (water marks, etc.) are sealed.
• Washing is done as required.

3. INTERIOR PAINT

• Prime coat as needed.
• Depending on surface, paint is applied with a brush, roller or sprayer.
• Surfaces are painted to appropriate cover and finish color.
• Clean lines between walls and trim.
• High quality paints are used and touch-up paint is left with customer.

4. CLEAN-UP

• Trash, etc. is removed.
• Furniture is moved back into position
• Floors and carpets are swept and vacuumed.

5. FINISH

• Walk-around inspection is done with crew and customer.
• Final "punch list" is developed and completed.

1. POWER WASHING

• Anti-mold agent is used to clean surfaces and some areas may be hand-washed.
• Debris, if any is removed.
• Appropriate drying time is required before next step (approximately one day).
• Driveways and decks cleaned upon request and may be extra.

2. SCRAPING, PRIMING AND, MINOR MAINTENANCE

• Scrape loose paint, caulk, putty, and prime as necessary.
• Paint-stripping and feather-sanding will be done by request and per contract.
• Any necessary wood or surface repair as specified on contract.
• Windows and doors are caulked and new putty on windows as needed.

3. EXTERIOR PAINT

• Finish coat is applied for appropriate coverage with brush, roller or sprayer.
• All necessary surfaces are covered to protect against drips, spray and splatter.
• 2nd coat as necessary and upon request.
• High quality paints with touch-up left with customer.

4. CLEAN UP

• Trash is removed and general clean-up daily.
• Landscape is protected and cleaned
• Furniture, etc. is replaced.

5. FINISH

• Walk-around inspection is done with crew and customer.
• Final "punch" list is developed and completed.